Zhoola For Balkrishna

Home Do-It-Yourself Clay Modeling Zhoola For Balkrishna

Clay Modeling

Zhoola For Balkrishna

By Hobbyideas Team

You Will Need:

Fevicryl Acrylic Colours Black 02, Fevicryl Acrylic Colour Pearl Metallic Gold 352, Fevicryl Mouldit, Fevicryl Fabric Glue, Fine Art Brushes, Corrugated Sheet, Wooden Stick, Velvet Fabric, Metal Wire, Clay Modelling Tools, Paper Cutter, Scissors, Golden Chain, Colour Palette, Water Container.

Product Used:

Description :

Create a traditional and decorative swing for a Balkrishna idol with clay modelling techniques and Fevicryl Acrylic Colours. This project combines intricate designs with vibrant colours to celebrate the festive spirit.

STEP 1 : Prepare the Base and Build the Clay Work

We are going to make a zhoola (swing) for a Krishna idol using corrugated sheet, Mouldit, and Acrylic Colours.
To make the base of the zhoola, mark and cut the corrugated sheet to 5” x 8”.
Use thick pieces from the corrugated sheet to make the legs for the base.
Cover the base with a slab made from the mixture of Mouldit resin base and hardener.
Use clay carving tools to create designs on the base and leave 2 big holes for attaching the pillars of the zhoola.

STEP 2 : Make the Pillars and Attach to the Base

Roll the dough to create a medium-thin slab using a rolling pin.
Take 2 thick wooden sticks for the pillars and cover them with the clay slab using Fabric Glue.
Use clay modelling tools to create patterns on the pillars.
Attach the pillars to the zhoola base with a small amount of clay and Fabric Glue.
Let it dry.

STEP 3 : Build the Peacock Design

Use clay and a piece of corrugated sheet to make the peacock design on the top of the pillars.
Use clay modelling tools and Fabric Glue for this step.
Cut a 2” broad strip from thick corrugated sheet for the support beam of the pillars.
Cover the strip with a clay slab using Fabric Glue.
Attach the support beam to join the two pillars with a small amount of clay and Fabric Glue.
Create 2 loops with metal wire and attach them to the support beam.

STEP 4 : Make the Asana for the Idol

Use a 4” x 4” MDF coaster to make the asana (seat) for the idol.
Decorate the MDF base with back and hand rests using corrugated sheet and clay, with the help of clay modelling tools and Fabric Glue.
Create 4 loops with metal wire on the asana base to attach the metal chain.

STEP 5 : Final Attachments of Zhoola

Attach the asana base to the support beam with a metal chain to complete the zhoola.
Attach a piece of chain to the front side of the asana to make it workable.

STEP 6 : Paint the Zhoola and Finishing Touches

Paint the zhoola/swing with an antique metal effect using Acrylic Colours Black 02 and Pearl Metallic Gold 352.
Let it dry completely.
Use velvet fabric to create the base and a pillow for the idol. Stick the velvet fabric to the asana base with Fabric Glue.
Stuff the pillow with cotton.
Refer to the image for the final look.
Your zhoola for Balkrishna idol is ready.

Hello, Guest